| 拉力范围的不同，决定了所使用传感器的不同 |
| 添加时间：2019/11/19 15:28:22 浏览次数： |
| 应考虑需要测试材料拉力范围 The tensile range of the material to be tested shall be considered 拉力范围的不同，决定了所使用传感器的不同，也就决定了拉力机的结构，但此项对价格的影响不大（门式除外）。对于一般橡胶生产厂家，拉力范围在200公斤。因此一般选用单柱式的比较多。 The different range of pulling force determines the different sensors used, and also determines the structure of the pulling machine, but this has little effect on the price (except for the door type). For general rubber manufacturers, the tension range is 200 kg. Therefore, the single column type is generally used. 与单柱式相对应结构的是门式结构，它是适应比较大的拉力，如500公斤或以上。用在金属材料试验多。速度0.01~500 mm/min左右。 Corresponding to the single column structure is the door structure, which is suitable for relatively large tension, such as 500 kg or more. It is widely used in metal material test. The speed is about 0.01-500 mm / min. 注:因橡塑厂家一般都要做延伸力,所以在在选购时一定要加延伸计,这样做出来的产品检验才OK.精度才能达到要求 Note: because rubber and plastic manufacturers generally need to do extension force, so extension meter must be added when purchasing, so that the product inspection is OK. The accuracy can meet the requirements |
| 上一页 选用钢丝绳卧式拉力试验机的技巧 |
| 下一页 双数显电子拉力机产品特征 |
Copyright © 技术支持：遨游网络