河北拉力机厂

作为在产品测试中针对产品力学性能进行测试的电子拉力试验机，它不仅性能优越，而且精准度高，同时产品价格也是不菲的，所以对于这样的机器，想要延长使用寿命，就一定要认真做维护和保养。应该在日常坚持对电子拉力试验机做检测，同时对有故障隐患的部位进行调整，如果有部件磨损程度较高，也要及时更换，这样才能维护测试结果的精确程度。

As the electronic tensile testing machine in the product test for the mechanical properties of the products, it is not only superior performance, and high accuracy, while the price is not cheap, so for such machines, to prolong the service life, we must seriously do maintenance and maintenance. We should insist on doing in the daily testing of electronic tensile testing machine, at the same time to adjust the position of a hidden fault, if there is a high degree of wear parts, to be replaced in a timely manner, so as to maintain the accuracy of test results.

具体来说，电子拉力试验机在日常使用的时候，应该从这些方面来进行保养：对于机器上固定产品所使用的夹具，应该注意经常涂刷防锈油，这样才能维护它的性能。同时因为夹具使用频率比较高，所以磨损的比较快，如果在氧化反应比较严重的时候就会让小活塞出现漏油的情况，所以应该经常清洁夹具，同时注意防锈防氧化反应。而夹具部位的螺钉的松紧情况也应该定期检查，在发现螺丝钉松动的时候要及时拧紧。

Specifically, when the electronic tensile testing machine used in daily life, should carry out maintenance from these aspects: fixture for fixed product machine use, should pay attention to regular brushing and antirust oil, so as to maintain its performance. At the same time fixture because of relatively high frequency of use, so wear faster, if serious in oxidation will make small piston oil leakage, so it should be regular cleaning fixture, while paying attention to anti rust and anti oxidation. The tightness of the screw in the fixture should also be checked regularly, and the screw should be tightened in time when the screw is loosened.

同时应该定期对于电子拉力试验机上的各种链轮进行检查，看其的传输和转动性能是不是顺畅，如果出现松动的情况，应该在张紧轮处调节松紧状态。同时在拉力机上控制器的连接线也应该留心，保持其良好接触的性能，如果出现松动和掉落的情况，也要及时加固，这样才能不影响电子拉力试验机的正常使用。同时对于控制器上的接口在使用的时候一定要保持准确对应的状态，不要出现接口插错的情况，可能会导致设备损坏，而且在插上或者拔出控制器上的接口的时候，一定要确定电源是处于断开状态的，这样对于操作人员以及拉力试验机都有好处。

At the same time should be regularly on the electronic tensile testing machine on a variety of sprocket inspection, to see whether its transmission and rotation performance is not smooth, if there is loose situation, should be in the tension wheel to adjust the tightness. At the same time connecting line controller in a tensile machine should also be careful to maintain its good contact performance, if the loosening and falling situation, should be timely reinforcement, so as not to affect the normal use of the electronic tensile testing machine. At the same time for the controller on the interface when in use must maintain accurate corresponding state, not plug the wrong situation, may cause damage to the equipment, but also in the insert or pull out the time on the controller interface, make sure power is in off state, it is good for the operation personnel and tensile testing machine.

同时如果您如果遇到很长时间用不着电子拉力试验机做实验的情况时，也要及时关闭电源，控制器和电脑也应该关闭，这样才能让电子拉力试验机的使用寿命不受影响。

At the same time, if you encounter a long time if no electronic tensile testing machine experiment situation, also please shut off the power controller and the computer should be closed, so as to make electronic tensile testing machine service life is not affected.